Technology / Certifications

12

tech3

DESMA has been one of the market leader in Shoe machinery and Moulds, especially due to the advanced PU-PVC technologies. Direct soling machines are offered for single- or dual-density applications

BMJ Safety Shoes are manufactured using DESMA German State-Of-Art Technology and Machinery, spanning the last 70 years. Its stringent processes meeting with ISO 20345:2004, ISO 9001:2008 and Singapore’s PSB standards.

Critical Testing Requirements

TESTSS 513: 2005 Requirements
Flexing of Steel Mid-SoleMust show no visible signs of cracking
Upper/Outsole Bond Strength4.0 min., if tearing 3.0 min
Anti-StaticDry: >= 100KΩ
Wet: >=1000MΩ
Impact TestToe cap is subjected to an impact energy of 200 Joules falling freely.
Min 15 mm
Nail Penetration TestA) Construction: Shall be built into the bottom of the shoe in such a manner that it cannot be removed without damaging the footwear.
B) Fastening – Not more than 3 hole each of max. diameters of 3mm
D) Penetration resistant – 1100N Min.

Certifications

SINGAPORE STANDARD
SS 513 : Part 2 : 2005

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

EN 388:1994, Protective gloves against mechanical risks
EN 12568:1998, Foot and leg protectors — Requirements and test methods for toecaps and metal penetration resistant inserts
EN 50321:1999, Electrically insulating footwear for working on low voltage installations
EN ISO 868, Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
EN ISO 3696, Water for analytical laboratory use – Specification and test methods (ISO 3696:1987)
EN ISO 3376:2002, Leather — Physical and mechanical tests – Determination of tensile strength and percentage extension (ISO 3376:2002)
EN ISO 3377-2, Leather – Physical and mechanical tests – Determination of tear load (ISO 3377-2: 2002)
EN ISO 4044, Leather — Preparation of chemical test samples (ISO 4044:1977)
EN ISO 4045, Leather — determination of pH (ISO 4045:1977)
EN ISO 4674-1:2003, Rubber- or plastics-coated fabrics – Determination of tear resistance – Part 1: Constant rate of tear methods (ISO 4674-1:2003)
EN ISO 17249:2004, Safety footwear with resistance to chain saw cutting (ISO 17249: 2004)
EN ISO 20345, Personal protective equipment – Safety footwear (ISO 20345:2004)
EN ISO 20346, Personal protective equipment – Protective footwear (ISO 20346:2004)
EN ISO 20347, Personal protective equimpent – Occupational footwear (ISO 20347:2004)
ISO 34-1:1994, Rubber, vulcanised or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
ISO 1817:1999, Rubber, vulcanised — Determination of the effect of liquids
ISO 2023:1994, Rubber footwear – Lined industrial vulcanized rubber boots – Specification
ISO 3290, Rolling bearings — Balls — Dimensions and tolerances
ISO 4643:1992, Moulded plastic footwear — Lined or unlined poly(vinyl chloride) boots for general industrial use — Specification

CE” originated as an abbreviation of Conformité Européenne, meaning European Conformity. CE marking is a mandatory legal conformity requirement for all products sold within the European Union that fall within the scope of a directive which requires a CE marking. By affixing a CE marking to a product and signing the Declaration of Conformity, a product supplier is declaring to the EU authorities that the minimum requirements of all applicable directives have been met. Depending on the directive, involvement of a European Union ‘Notified Body’ may be mandatory for certain types of products
“ISO 9001 Certified” means an organization has met the requirements in ISO9001. It defines an ISO 9000 Quality Management System (QMS). ISO 9001:2008 is focused on meeting customer expectations and delivering customer satisfaction so you must pay attention to the customer.